Fitting an EGGER worktop correctly is essential for achieving a professional finish and protecting the worktop from moisture. Whether you are joining worktops, fitting a sink or hob, or using an EGGER worktop in a bathroom, the correct installation products and methods should always be used.
How are EGGER worktops joined?
EGGER worktops are joined using EGGERSeal, a waterproof jointing compound and sealant, together with the appropriate worktop connectors and jointing components. The exact fixing system depends on the type and thickness of the worktop being installed.
EGGER's fitting guides provide detailed instructions for creating the joint, applying EGGERSeal and tightening the worktop connectors. EGGERSeal should be applied to the joint and relevant exposed areas to create a waterproof seal and help prevent moisture from reaching the worktop core.
We recommend following the relevant EGGER fitting guide for your worktop and using the specified EGGER installation products. EGGER states that its 10-year worktop guarantee applies when the worktop is fitted using EGGERSeal in conjunction with the fitting guide supplied in the installation kit.
Are EGGER worktops supplied prefabricated?
No. EGGER worktops are not supplied prefabricated or pre-jointed.
Worktops are supplied as worktop lengths and need to be measured, cut and fitted to suit the individual kitchen or installation. Cutting, jointing, sealing and fitting are normally carried out on-site by the installer or a professional worktop fitter.
EGGER provides installation guides for its different worktop types and thicknesses to help ensure the worktop is cut, joined and sealed correctly.
At Lawcris, we offer a cutting service to ensure that your worktops perfectly fit your project requirements.
Can EGGER worktops be fitted with an undermount sink?
Yes, undermount sinks can be used with suitable EGGER worktops. However, suitability depends on the specific EGGER worktop construction and thickness, so the relevant product specifications and instructions should always be checked before cutting.
EGGER's guidance includes installation information for undermount sinks, while its compact laminate worktops are specifically described as suitable for undermount sinks in kitchens and bathrooms.
Any sink cut-out must be made accurately using the sink manufacturer's dimensions or template, and exposed edges around the cut-out should also be properly sealed to protect the worktop core from moisture.
Can drainage grooves be cut into an EGGER worktop?
This depends on the range of EGGER worktop that you’ve chosen for your project. While this isn’t suited to standard chipboard core worktops, it is possible with EGGER solid core worktops as these have a resin core all the way through.
Which hob is best for an EGGER worktop?
Induction hobs are the best-suited option for EGGER worktops, but as with any hob installation, the cut-out must be made in accordance with the hob manufacturer's dimensions, positioning requirements and installation template. Appropriate clearances and ventilation requirements must also be followed.
Are EGGER worktops suitable for bathrooms?
Yes. EGGER worktops can be used in bathroom applications, including as washbasin countertops, subject to the specific worktop product and correct installation.
Compact laminate worktops are particularly suited to humid conditions and are specifically listed for use with washbasins and undermount sinks in bathrooms.
However, it’s essential that you correctly seal your worktops to prevent moisture entering through exposed areas such as cut-outs, joints, drilled holes and other fixtures. These areas should therefore be properly sealed during installation.
What should I use to fit an EGGER worktop?
The exact installation products depend on the EGGER worktop type and thickness, but installation will generally involve the appropriate:
EGGER fitting guide
EGGERSeal waterproof jointing compound/sealant
Worktop bolts or connectors
Jointing biscuits where specified
Worktop jig for creating the required joint
Appropriate tools for cutting and fitting
Additional support components where required for sink or hob cut-outs
EGGER provides separate installation guidance for different worktop constructions, including 16 mm, 25 mm and 38 mm worktops.
Can I cut an EGGER worktop for a sink or hob myself?
Yes, EGGER worktops can be cut for sinks and hobs, but accurate cutting and correct sealing are essential.
Cut-outs should be made according to the appliance or sink manufacturer's measurements and templates. EGGER also recommends appropriate support around cut-outs to maintain worktop strength and stability.
How do I protect an EGGER worktop from moisture?
The worktop surface itself provides protection, but moisture can penetrate through unsealed cut-outs, joints, and other exposed areas. These areas must therefore be properly sealed during installation.
EGGERSeal is designed to provide a waterproof seal at worktop joints and can also be used for suitable sealing applications around worktops, splashbacks and upstands.
Correct sealing is particularly important around sinks, basins, taps and other areas where the worktop may regularly come into contact with water.
Where can I find the EGGER worktop fitting instructions?
At Lawcris, we provide our EGGER customers with installation information and guidance to help them correctly install worktops in their projects..
It’s important that you always use the fitting guide for the specific worktop you are installing, as the fixing method and installation requirements can vary between products.